Products

Tecsi Industrial Nozzles » Full Cone Nozzles » Spiral B9 large

Spiral B9 large

The Type B9 spiral nozzle gives a full cone jet of wide angle ( up to 170°) with low water pressures  ( from 0.5 - 1 Bar).

The spray is generated from the deflection of a central jet against the spiral: such impact generates concentric circles of water which are quite similar to a full cone spray.

 

Material:  they may be built  in stainless steel AISI 316, Brass or plastic material ( PP ; PVC or PTFE).  Plastic materials are not recommended for applications over 5 Bar.

 

Capacity: this nozzle is produced  in various sizes, following the below table: capacities are from 5,5 L/ min up to 4140 L/ min, at a pressure of 3 Bar.

 

Spray angle:  five spray angles are available: 60°, 90°, 120°, 150° and 170°.

 

This nozzle may have a protective cap (on request), fitted over the spiral. The cap is dislodged by the jet; but it is retained by a chain and may be refitted.

 

---