Products
Tecsi Industrial Nozzles » Flat Spray Nozzles » CD3 Flat Spray Wide
-
CD3 Flat Spray Wide
Type CD3 nozzles and DH tips provide a very wide spray pattern up to 160 degrees, suitable for damping or wetting a moving product or air stream. Design operating pressures are generally lower than for other types of nozzles.
Rated flows are from 0.3 L/ minute to 410 L/ minute; operating pressures from 0.2 Bar to 4 Bar; spray angle is up to 165 degrees depending on supply pressure.
Thread connections for Type CD3 are from 1/8" to 1"BSPT male.
DH tip is available in limited sizes, and is assembled with the standard tip assembly components and accessories (See "Accessories – Spray Tip Components and Accessories" page).
Very wide spray angle with low impact. One piece nozzle, male connection. Material: available in brass or stainless steel AISI grade 303.
APPLICATIONS
-
Cooling
-
Film washing
-
Fire protection
-
Lubrication
-
Humidifying felts
To order: specify thread size, nozzle code, size code, spray angle and material - eg 1/8 CD3 – 5 B.
-
