Products

Tecsi Industrial Nozzles » Hollow Cone

A1 Hollow Cone Tangential

The standard hollow cone nozzle Type A1 is of the tangential type and provides a spray angle of about 60 degrees. • Removable cap. • Spray at 90° from the inlet axis. Rated flows are from 0.2 L/...

A3 Hollow Cone Wide

The hollow cone wide nozzle Type A3 is of the tangential type and provides a spray angle of 120 degrees. Removable cap Spray at 90° from the inlet axis Rated flows from 0.2 L/ minute to 90...

DV Disk & Core Assemblies

The hollow cone nozzle assembly disc-and-core design Type DV is rated at a higher operating pressure to deliver finer atomization. The delrin plastic core gives the liquid a rotary motion before it...

A9 Spiral Hollow Cone

  The spiral Type B9 nozzle gives a full cone jet of wide angle ( 90° , 120°) at low water pressures  ( from 0,5-1 Bar). The spray pattern is generated by the deflection of...