Products

Tecsi Industrial Nozzles » Full Cone Nozzles

B1 Full Cone

Type B1 nozzles use an internal swirl plate to give a uniform full cone spray pattern. Rated flows from 0.4 L/ minute to 150 L/ minute; operating pressures from 0.75 Bar to 7 Bar; spray angle 60...

B1 Full cone large capacity

Type FB1 nozzles are large capacity full cone pattern nozzles in cast stainless steel, with a machined female thread. Rated flows are from 28 L/ minute to 1100 L/ minute; operating pressures from...

B2 Full Cone Wide

Type B2 nozzles use an internal swirl plate to give a uniform full cone spray pattern with a wider 120 degree pattern. Rated flows are from 1.0 L/ minute to 890 L/ minute; operating pressures from...

B3 Full Cone Square

Type B3 nozzles use an internal swirl plate to give a uniform full cone spray pattern with a 60 degree angle. The aperture is modified to give a square pattern. Rated flows from 1.5 L/ minute to...

B4 Full Cone Wide Square

Type B4 nozzles use an internal swirl plate to give a uniform full cone spray pattern with a wider 120 degree angle. The aperture is modified to give a square pattern. Rated flows are from 5.6 L/...

BB5 6 Full Cone Tangential

Type BB5 and BB6 nozzles are designed to create the spray pattern by introducing the liquid tangentially into a whirl chamber. The flow pattern from the nozzle orifice is in the form of a full cone...

Injector Type B7 & BB7

Type B7 and BB7 injector nozzles have a narrow spray angle for higher impact full cone spray. Rated flows from 0.4 L/ minute to 1400 L/ minute; operating pressures from 2.0 Bar to 30 Bar; spray...

BG Full Cone Tips

Tips Type BG are assembled with standard tip assembly components and accessories - (See "Accessories – Spray Tip Components and Accessories" page). Rated flows are from 0.45 L/ minute to 18 L/...

CX Hydraulic Atomising

The low flow rate nozzles Type CX and MX produce very finely atomized droplets using hydraulic pressure alone and provide a semi-full cone spray pattern. Rated flows are from 3.6 L/ hour to 320 L/...

Spiral Type B9

The Type B9 spiral nozzle gives a full cone jet of wide angle ( up to 170°) with low water pressures  ( from 0.5 - 1 Bar). The spray is generated from the deflection of a central jet...

Spiral B9 large

The Type B9 spiral nozzle gives a full cone jet of wide angle ( up to 170°) with low water pressures  ( from 0.5 - 1 Bar). The spray is generated from the deflection of a central jet...