Products

Tecsi Industrial Nozzles » Flat Spray Nozzles

C1 Flat Spray Tips

Type C1 tips are assembled with the standard tip assembly components and accessories (See "Accessories – Spray Tip Components and Accessories" page), and provide similar performance to the...

C2 Low Capacity Flat Spray

Type C2 is a low capacity flat spray nozzle, one piece with a male thread;  may be fitted with an optional screw-in filter. Rated flows from 0.1 L/ minute to 20 L/ minute; operating pressures...

C3 Flat Spray

One piece nozzle, male connection. Rated flows from 0.7 L/ minute to 1470 L/ minute; operating pressures from 1.0 Bar to 35 Bar; spray angles 0 - 15 - 25 - 40 - 50 - 65 - 80 - 95 - 110 degrees....

C4 Flat Spray - Hardened

Nozzles Type C4 are no longer available - SUPERCEDED by Type HP which are electro-nickel plated and have a higher pressure rating.

HP Flat Spray - Hardened

Type HP nozzles are stainless steel with electro-nickel surface treatment for high pressure rating and longer service life. Flat or solid stream spray pattern. The orifice is recessed to protect it...

CD3 Flat Spray Wide

Type CD3 nozzles and DH tips provide a very wide spray pattern up to 160 degrees, suitable for damping or wetting a moving product or air stream. Design operating pressures are generally lower than...

CD4 High Impact Flat Spray

The Type CD4 spray nozzle provides a very high impact flat spray pattern with well-defined edges. Rated flows are available of 1.4 L/ minute to 144 L/ minute at operating pressures from 2.0 Bar to...

CD6 Self Cleaning

Self-cleaning nozzles Type CD6 have an internal spring and piston which retracts as the fluid line pressure reduces, causing a purge of solids which may have been starting to block the nozzle. Made...

C5 Air & Steam Nozzles

Nozzles Type CD3 and C5 are designed for use with gases - compressed air and steam. Material: available in brass or stainless steel AISI grade 303. CD3 is a one piece nozzle.   Type C5 spray...